The heater must be secured into position to prevent it from being tipped over.
The following securing options are available:
Method A - Securing the heater with Screws.
Method B - Securing the heater with Wire.
Method C - Securing the heater using the Spacer Frame supplied with the
heater.
Method D - Securing the heater using the Optional Spacer Frame (kit number
0584081).
Method E - Securing the heater in an elevated position using the Optional
Spacer Frame kit (kit number 0584081) and the Elevated Installation kit (kit
number
0584091).
The Nano fascia has been designed for traditional installations where the base of
the fascia sits on a hearth or similar surface. For this reason we do not
recommend the Nano model for wall mounting.
If fitting the heater into a fireplace or surround opening, try the heater in the opening to
ensure that it will fit.
If fitting the heater onto a decorative hearth surface such as marble or tile it is
advisable to protect the hearth surface. Do not drag the heater as the surface finish
may be damaged.
Method A - Securing with screws.
Note - If fixing to marble it is recommended that
Method B - ‘Securing with wire’ is used. Drilling
marble without the correct tools and experience may
result in the marble cracking.
1. Place the heater into the fireplace or surround
opening. Make sure that the heater is in the middle of
the surround or fireplace.
2. There are two slotted holes in the top of the heater
and four holes in the side flanges (See figure 5). We
recommend the use of two upper holes and two lower
holes. Mark through the required holes so that their
position is clear when the heater is removed.
3. Remove the heater.
4. Drill an appropriate size hole in each of the marked
positions for the wall plugs supplied. Insert wall plugs
into the drilled holes.
5. Place the heater so that the holes are in line with
the wall plugs in the fixing surface.
6. Screw and secure the heater with four woodscrews - (See figure 4 and
5).
Page 11
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2008.
Figure 5. Screw location
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce